6 'high level' steps needed, follow down the page to make this a painless systematic process

Step 1: Your CAC reader must be Mac friendly

Find programs to help navigate or maximize the use of supported smart cards and smart card readers. These utility tools are offered free of charge. Tools can be used only with the supported operating systems, indicated respectively.

Visit the USB Readers page to verify the CAC reader you have is Mac friendly

'Some, not all' CAC readers may need to have a small program installed to make it work.

NOTE: Readers such as: SCR-331, GSR-202, GSR-202V, & GSR-203 could need firmware updates (NO OTHER Readers need firmware updates).

Information about these readers are in Step 2

Step 2: The Mac must be able to 'see' the reader

Plug the CAC reader into an available USB port before proceeding, give it a few moments to install

Step 2a: Click the Apple Icon in the upper left corner of the desktop, select 'About This Mac'

Step 2b: Click the 'More Info' (button)

Step 2c: Click 'System Report...' (button) (Only available in 10.7.x and above; 10.6.x and earlier will not see this window)

Step 2d: Make sure the CAC reader shows in Hardware, USB, under USB Device Tree (See image below). Different readers will show differently, most readers have no problem in this step. See Step 2d1 for specific reader issues.

Step 2d1: Verify firmware version on your SCR-331 or GSR-202, 202V, or 203 CAC reader. If you have a reader other than these 4, GO TO STEP 3

Step 2d1a-SCR-331 reader

If your reader does not look this this, go to the next step.

Below 'Hardware' click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for “SCRx31 USB Smart Card Reader.” If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 5.18, you need to update your firmware to 5.25. If you are already at 5.18 or 5.25, your reader is installed on your system, and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.

Step 2d1b-IOGear GSR-202, 202V, and 203 readers

If your reader does not look like these, go toStep 3.

Below 'Hardware' click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. You should see “EMV Smartcard Reader.” If the Smart Card Reader is present look for 'Product ID' in the lower right corner of this box: If you see: 0x9540, you need to downgrade the firmware to 0x9520. If you see 0x9520, your reader is installed on your system, and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.

Step 3: Verify which version of OS X is installed on your computer

(You need to know this information for step 6)

Step 3a: Click the Apple Icon in the upper left corner of your desktop and select 'About This Mac'

Step 3b: Look below Mac OS X for: Version 10.X.X.

Step 4: Verify which exact CAC (ID Card) you have

(You need to know this information for step 6)

Look at the back of your ID card (above the black strip) for these card types. If you have any other version than the four shown below, you need to visit an ID card office and have it replaced. All CACs [other than these four] were supposed to be replaced prior to 1 October 2012.

Find out how to flip card over video

Step 5: Decide which CAC enabler you can / want to use

After installing the CAC enabler, restart the computer and go to a CAC enabled website

Optional Step 6: Update your DoD certificates:

Step 6a. Load the DoD Intermediate certificates into your keychain

then...

Step 6b. If your CAC has a CA between 27 and 32 [and they didn't show up after 5a above] you'll need toinstall all of the CA 27 to 32 and CA Email 27 to 32 certificates manually. You can download the AllCerts.zip (http://militarycac.com/files/maccerts/AllCerts.zip) file, then double click each certificate individually to have them install into the login section of keychain. If you want to verify they are there, follow guidance on the Keychain page. Idea # 2 only.

If you receive Error: 100013, click here for instructions

Mac support provided by: Michael Danberry

CAC Reader / Smart Card Reader

How To Install Cac Reader On Mac

The IOGEAR GSR202 is a TAA compliant USB Common Access Card Reader for military, government and even private sector workers who need everyday access to secure systems. Common Access Card (CAC) or Smart Card readers are used as a communications medium between the Smart Card and a host (e.g. a computer, point-of-sale terminal, network system, etc.) in secure systems such as those used by government, banking and health care.

IOGEAR's USB Common Access Card Readers require the card to be inserted directly into the reader where electrical contacts retrieve the data stored in the card’s chipset. IOGEAR’s physical contact readers are less prone to misalignment, which helps to eliminate the possibility of being misread.

What is a Smart Card or Common Access Card?

Often referred to as a Smart Card, the Common Access Card (or CAC) is the shape of a credit card, and is embedded with a data chip allowing specialized access. In addition to the embedded chip, Smart Cards are usually programmed with a PIN to ensure security for both the card holder and the system being accessed. Having reached tremendous adoption rates outside of the U.S., Smart Cards are now rapidly growing in this country to combat credit card fraud, while also providing the next generation of secure and user friendly identification. The federal government issues Common Access Cards programmed with a Personal Identification Verification (PIV) chip containing the data necessary for the cardholder to be properly identified and granted access to secure federal facilities and information systems. Smart Cards have been in use by the federal government in accordance with Homeland Security Presidential Directive 12 (HSPD-12) since 2006, and now the technology is rapidly spreading to banking, healthcare and other areas requiring identity verification and secured access.

What is FIPS 201?

FIPS 201 is a set of United States federal government technical standards and issuance policies specifying the Personal Identity Verification (PIV) requirements for federal employees and contractors. These standards dictate the manner by which authorized persons are granted physical and/or logistical access to federal government facilities and networks. IOGEAR’s Smart Card/Common Access Card readers are FIPS 201 compliant.

What is TAA Compliance?

TAA compliance indicates that a specific product follows the requirements outlined in the Trade Agreements Act of 1979, basically stating that the product is made in either the United States or a designated country. The designated country list includes those entered into free trade agreement with the U.S., those that take part in the World Trade Organization Government Procurement Agreement, those listed as a Least Developed Country (LDC), and others. Government purchase contracts, especially those for the Department of Defense, generally stipulate a product be TAA compliant in order to be considered for purchase. All of IOGEAR’s TAA compliant products meet the General Services Administration (GSA) Schedule requirements for government procurement. Additionally, several of these products are already listed on the GSA Approved Products List so government contractors, distributors and buying offices may refer to the following APL numbers listed below. Please also note that TAA compliance is not mandatory for all government agencies, so IOGEAR also offers a similar non-TAA compliant version of some products in order to provide lower pricing when TAA compliance is not required. For more information or questions about TAA compliance products, please contact us directly.

For a list of all IOGEAR TAA compliant products click here.

The following IOGEAR products are already listed on the GSA Schedule:
GSR202 USB Smart Card Reader: GSA APL #579
GSR203 Portable Smart Card Reader: GSA APL #693
GKBSR201 Keyboard w/Built-in Common Access Card Reader: GSA APL #612

Cac Reader For A Mac

For a list of all IOGEAR TAA compliant products click here.

How To Install Cac Card Reader On Mac

The following IOGEAR products are already listed on the GSA Schedule:
GSR202 USB Smart Card Reader GSA APL #579
GSR203 Portable Smart Card ReaderGSA APL #693
GKBSR201 Keyboard w/Built-in Common Access Card ReaderGSA APL #612